What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
Last Updated: 22.06.2025 05:00
An AC voltage/ current source, and an ac inductive load.
There are two important concepts here.
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
Was Daenerys' downfall inevitable after she left Meereen in Game of Thrones?
The third is lightning and “how it gets conducted into a home.”
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
What is the worst name in Tolkien’s legendarium (meaning and look)?
eight
It also is a device that limits the change in current flow.
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
Will Canada and Mexico become stronger partners in the Trump era?
At least they know the answer if they wanted it.
This is the picture of an electronic coil of wire wound around a core of magnetic material.
So, the voltage could go up to 500 volts, and the fuse will not open up.
The bolt then partially travels down the line to your home.
But… the neutral is now “floating” because of the 1 ohm resistance.
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
(Dc diagram shown, AC is similar).
Edit 2024–10.
2024–10–10[John johnson John Johnson ]
He then asserts :
Barnstars:
A circuit breaker is similar, but is resettable.
How do you know when someone really loves you?
He then describes the function of a fuse.
One is “what exactly is in a ‘surge protector’ ? ”
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
What are your thoughts on the dating app "scam"?
One
a photo is worth a thousand words.
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
Apple’s Upgrades to CarPlay, iPad and Vision Pro Outshine Liquid Glass - Bloomberg.com
but I think this circuit , shows a few more pieces.
There are three different concepts here that are getting confused.
The MOV will conduct when the voltage exceeds 50% of line voltage.
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
Upvotes:
What are the downsides of OpenAI's chain-of-thought approach in the o1 model?
Because the load is inductive, the current lags the voltage.(by a bit).
First Sentence:
nine
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
2024–10–14 [Omar Gharbi Omar Gharbi ]
A fuse is a non-resetable over current circuit protector.
[image of Common-mode choke]
The other is “what does a “fuse” do?”
This is where the MOV conducts again, and dissipated the energy.
[old diagram got deleted by accident]
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
so, what happens?
What is lightning?
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
This is 'the assistant's answer'
This one hit behind the barn.
Can the fuse protect the electronic devices from lightning instead of a surge protector.
but this device (an Inductor) … impedes the rapid changes in the current.
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
At one ohm, the resistor has a maximum of 1 watt power.
I post the exact comment here.
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
But it can get overloaded, and no longer works.
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
For this case there are devices called Metal oxide varistors (MOV).
These are simplified answers to the original question, and does not change anything I wrote above.
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
the problem then depends on "how fast does the fuse operate?".
This is where this question deviates from being a 'generic' question, and becomes more specific.
These devices are installed between the “hot” and “neutral” and protective ground.
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
Here is a simplified AC power diagram.
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
He then describes Rainy Season and Lightning.
What does a fuse do?
This device then solves the entire problem.
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
Now when you have a certain ac resistance, then a current flows in a loop.
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
In schematic diagrams this is the symbol for a fuse:
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
2024–10–16 [ OO OLAOYE OYEBODE ]
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
It seems Mohan does not understand the difference between a comment and an Answer.
what exactly is a ‘surge’ protector?